Instructions ….

0) Listen if the repeater is in use
1) ID.  ex: “KD5NJR accessing Echolink”
2) While holding down the PTT, push the buttons for the node (the distant repeater) you want.
3) Let off.
4) You’ll hear it connect our repeater to their repeater.
5) ID again. ex: “KD5NJR Oklahoma via Echolink”
6) Maybe work someone.  Or not
7) Send (push and hold PTT) a #
8) hear it disconnect and then ID again. ex:”KD5NJR clear echolink”
9) rinse and repeat.